Low cost NC rotary table with independent controller

Quality NC performance at minimum
investment means maximum profit

Combine the high clamping power and highest accuracy in its class of the KDH rotary table with the simple, easy-to-program independent PMP NC controller and you get a unique profit-making solution for your operation. You'll achieve superior efficiency and quality results for machining, grinding, EDM, quality measurement and more. Best of all, the combination is priced to beat the competition. Two sizes of rotary table are available in a complete package with controller. All you need is a power source and an air line. ISO registered and made in Japan.

Simple, independent NC controller
makes programming easy

Compact, lightweight controller can be programmed directly from control panel keyboard with simple NC command statements. Program selection and operation can be executed from the NC machine.

• Sixteen channels x 100 steps
• Four modes of operation
  • Program — displays program command entries
  • Position — displays current position while executing
  • Diagnostic — displays error codes at failure
  • Parameter — displays changes during editing
• LED data display
• LED Status signals
• Emergency stop pushbutton
• Power on/off
• Simple four cable hookup
• Horizontal or vertical installation

Two sizes of low cost, accurate, high clamp force rotary table for NC machining applications

Two Logansport Matsumoto rotary tables integrate into NC machine programs when used with the PMP-750 controller.

• Model KDH-203R has a 7-7/8 inch table with a maximum rotation speed of 33.3 rpm. Its accuracy is 30-sec. with repeatability of ±2-sec. with minimum resolution of 0.001 degrees. It provides a clamping force of 225 ft-lb.
• Model KDH-302R has a 11-13/16 inch table with a maximum rotation speed of 16.6 rpm. Its accuracy is 20-sec. with repeatability of ±2-sec. with minimum resolution of 0.001 degrees. It provides a clamping force of 435 ft-lb.