LPS Series Quick Setup Wheel Chucks from LMC Workholding
Adjusting a cam arm from one wheel diameter to another in seconds makes this chuck ideal for aftermarket wheel manufacturers and OEM suppliers who handle short-run specialty wheels. Each cam arm handles four diameters within a 6" range. One: Insert wrench. Two: Crank cam arms to desired diameter. Three: Remove wrench.
The LPS Series (from LMC Workholding) for automobiles and light trucks allows for variations in raw castings as well as for new “fashion” wheel designs where material is added to the raw casting for first operation holding..
Lean Production Series Specifications |
Model Number |
Capacity Wheel Dia. |
RPM's (max) |
Drawbar Pull (lbs) |
Drawbar Stroke (in/ mm) |
Spindle Mount |
Chuck Wt. (lbs) |
“A”
dia. (in/ mm) |
“B” (in/ mm) |
LPS-1520 |
15"
to 20" |
2800 |
7700 |
1.38/35 |
A2-8 |
330 |
29.45-748.0 |
7.32-186.0 |
Note on tooling: There are many tooling options, often specific to individual wheels. Please contact LMC for more information and specific tooling examples.
|
Logansport Matsumoto Company P.O. Box 7006 1200 West Linden Avenue Logansport, IN 46947-7006 USA Phone: 574-735-0225 Fax: 574-722-6559 E-Mail:info@logan-mmk.com |
|
|
