LMC Workholding
Company and Product News

Extra Large Neidlein Face Driver
From LMC Workholding

The Neidlein FSB 75 face driver from LMC
Workholding is used to efficiently cut large-size workpieces. The FSB 75 is able to make heavy
cuts on large barstock and forged workpieces
up to 12’ long, 28” in diameter and weighing up
to 13,000 pounds.  This face driver has an infeed
up to 32mm and a feed rate of approximately
1mm/rotation. This extra large face driver can be
used in applications such as mining, heavy
engineering industry and manufacturers of
semi-finished parts (shafts and forged rolls).

Neidlein face drivers quickly grip and turn
a workpiece from its end, allowing the operator
to turn, grind, mill or hard-turn the entire O.D.
of the workpiece in one operation. Mechanical face drivers allow turning applications to have increased flexibility to lower cycle times and allow large interrupted and heavy cuts. Neidlein face drivers
offer fast set-up, quick change overs, improved part quality, reduced cost and lower maintenance.

The entire LMC Workholding line includes...

• LMC power chucks, cylinders and wheel chucks;
• Atling Steady Rests;
• Neidlein face divers, as well as live and dead centers.

Contact Logansport Matsumoto Company, P.O. Box 7006, Logansport, IN 46947-7006, Telephone 574-735-0225, Fax 574-722-6559, E-mail info@logan-mmk.com.