PBH Pin Arbor Chucks From LMC Wokholding
Like
our PB Chuck, our PBH Chuck holds round workpieces with flat surfaces.
The PBH Chuck additionally features a standoff behind the chuck to support the back side of the jaws. The result…it gives the chuck added rigidity and greater support so longer parts will not flex during machining, especially important in higher speed machining.
The PBH Chuck is
offered standard in 5", 6", 8" and 10" sizes. It
can be supplied with air, coolant through the chuck,
or both air and coolant.
Similar to the PB in pull-down clamping action, PBH type chucks also provide O.D. slide guides to enhance increased turning speed, accuracy.
- Pulling action of jaw clamps provide secure, yet not excessive workholding force
- O.D. slide guide
delivers…
- more accurate clamping
- high speed turning capabilities
- 5", 6", 8", 10", 12" and 15" sizes available
PB Pin Arbor chucks pull the jaws back to more securely clamp the work.
For ID gripping of ring shaped parts, choose our PBN Pin Arbor Chucks.
|
Model |
PBH-5 |
PBH-6 |
PBH-8 |
PBH-10 |
PBH-12 |
PBH-15 |
|
Specifications |
||||||
|
Jaw
Stroke, mm (dia) |
3.4 |
4.2 |
4.2 |
4.2 |
4.2 |
4.2 |
|
Clamping
Diameter- Standard, mm |
65-80 |
86-100 |
120-140 |
150-180 |
190-230 |
240-290 |
|
Clamping
Diameter- hard type, mm |
15-60 |
20-80 |
60-110 |
100-145 |
120-200 |
220-280 |
|
Gripping
Force, Kgf |
5500 |
9400 |
11,700 |
1,4000 |
1,000 |
18,000 |
|
Max
Draw Pull, Kgf |
1200 |
2000 |
25000 |
3000 |
4000 |
4000 |
|
Max
Rotation Speed, rpm |
7000 |
6000 |
4500 |
3200 |
2500 |
2000 |
|
GD2,
Kg-m2 |
0.067 |
0.2 |
0.54 |
1.43 |
3.5 |
10.4 |
|
Weight,
Kg |
8 |
16 |
27 |
46 |
70 |
130 |
|
Applicable
Cylinder |
2R105 /21-25 |
2R105 /21-25 |
2R120 /21-25 |
2R120 /21/25 |
RNKP105 /35-01 |
RNKP105 /35-01 |
|
A,
mm |
130 |
162 |
210 |
250 |
320 |
400 |
|
B,
h6 |
60 |
80 |
80 |
80 |
ASA#8 |
380 |
|
C,
mm |
24 |
32 |
40 |
45 |
50 |
60 |
|
D,
mm |
72 |
90 |
100 |
110 |
130 |
137 |
|
F,
mm |
5 |
7 |
7 |
7 |
7 |
7 |
|
G,
mm |
20 |
30 |
30 |
30 |
40 |
40 |
|
H,
max, mm |
18 |
20 |
25 |
25 |
30 |
25 |
|
H,
min, mm |
10 |
10 |
15 |
15 |
20 |
15 |
|
I |
M20
x P1.5 |
M2
x P1.5 |
M25
x P1.5 |
M28
x P1.5 |
M32
x P1.5 |
M42
x P1.5 |
| J |
3-M8 PCD 100 |
3-M12 PCD 130 |
3-M16 PCD 175 |
3-M16 PCD 210 |
6-M16 PCD 171.4 |
3-M24 PCD 330.2 |
| M, mm | 16 |
20 |
20 |
21 |
23.5 |
33.5 |
| U1, mm | 28 |
60 |
60 |
66 |
70 |
80 |
| U2 | 3-M5 |
3-M5 |
3-M8 |
3-M8 |
3-M8 |
3-M8 |
| V1, mm | 25 |
28 |
28 |
28 |
28 |
28 |
| V2, mm | 5 |
5 |
5 |
5 |
5 |
5 |
| V3, mm | 10 |
12 |
12 |
12 |
12 |
12 |
| W1, mm | 16 |
35 |
40 |
40 |
50 |
60 |
| W2, mm | 16 |
25 |
26 |
26 |
36 |
46 |
| W3, mm | 5 |
8 |
8 |
8 |
8 |
8 |
|
Logansport Matsumoto Company P.O. Box 7006 1200 West Linden Avenue Logansport, IN 46947-7006 USA Phone: 574-735-0225 Fax: 574-722-6559 E-Mail:info@logan-mmk.com |
